White cement based, single component, used for bonding tiles and ceramics, with slip properties.

reduced powder mortar.

Usage areas:

•Indoors.

•On horizontal and vertical surfaces, For bonding small and medium sized floor and wall ceramics with water absorption rate above 3% .

•Used on coating materials with a maximum size of 33 x 33 cm.

Advantages:

•Easy to apply.

•It is economical.

•It is decorative due to its white color.

•Since it is the same color as the white joint, the joint application can be started in a shorter time.

•Does not sag in vertical applications.

Preparation of the Surface:

•Make sure that the application surface is cured.

•The application surface must be clean of anti-adhesion substances such as dust, oil, tar, pitch, paint, silicone, curing material, detergent and mold oils.

•Defects on the application surface should be corrected with suitable DEMAFIX repair mortars 24 hours before, depending on the depth and structure of the surface.

•The application surface should be wetted and kept moist. If the surface is very water absorbent, application should be made after applying a primer to the surface.

•Before using ceramic adhesive in wet area applications, DEMAFİX must be applied for proper waterproofing.

Waterproofing should be applied with materials .

Preparation of Mortar:

•25 kg DEMAFIX Tile and Ceramic Adhesive Mortar (White) is added to approximately 5.5 - 6.5 liters of clean water and mixed preferably with a low-speed mixer until there are no lumps.

•The prepared mortar is left to mature for 5 - 10 minutes and used again by mixing for 1 - 2 minutes.

•The mixture in the container should be consumed within approximately 1.5 hours.

Application Information:

•First of all, the adhesive mortar is pressed strongly onto the application surface to form a contact layer. is created and then the product is combed with a notched trowel selected according to the tile size. must be in contact with at least 80% of the back side of the ceramic.

•To ensure good adhesion, the ceramic must be adhered to the surface by applying force with a rubber-tipped mallet.

•By leaving a joint space compatible with the ceramic size and using the appropriate DEMAFIX joint filling material.

The application must be completed. 

Consumption:

3.5 - 4 kg/ ^m2

Attention:

•Avoid application at temperatures below +5°C and above +35°C.

•Pay attention to the amount of water added to the mortar. Do not add more water than necessary.

•In areas that are frozen, at risk of freezing within 24 hours, or exposed to direct sun and wind

application.

•Never add water or powder to expired mortar . 

PACKAGING:

25 kg craft bags 

Shelf life:

12 months on a pallet in a 10-layer stack in a moisture-free environment and in its unopened packaging.

can be stored .

Health and Safety:

As with all chemical products, food products, skin, eyes and mouth may be contaminated during use and storage.

contacted . During application, wear work clothes and protective clothing in accordance with occupational and worker health rules.

Gloves , glasses and mask should be used. If swallowed by accident, consult a doctor. In contact with skin plenty of water. It should be stored in places inaccessible to children.