Technical Spesifications: |
|
Appearance: |
White fine powder |
Powder Density: |
~ 1,40 kg/lt |
Water Mixing Ratio: |
5.5 - 6.5 l water / 25 kg powder |
Resting Time: |
5 - 10 minutes |
Pot Life: |
~ 2 hours |
Extended Open Hold Time Withdraw. Strength: |
Min. ≥ 0.5 N/mm 2 after 30 minutes (EN 1346) |
Application Temperature: |
Between +5°C and +35°C |
Adhesion Strength: |
≥ 1 N/mm 2 28 days (EN 1348) |
Slippage: |
≤ 0,5 mm (EN 1308) |
Walkable Time: |
24 hours |
Service Temperature: |
-20°C / +80°C |
It is a white cement-based, single-component, polymer-added, powder adhesive mortar that is very flexible, has high performance and stability, has reduced slip properties and has a long working time.
Usage areas:
•Indoors and outdoors.
•On horizontal and vertical surfaces.
•For bonding large sized floor and wall ceramics, granite, granite ceramics, marble, clinker and all kinds of natural stone covering materials.
•In places such as workplaces, shopping malls, schools and hospitals that are exposed to heavy pedestrian traffic.
•In bottom heated systems.
•Ceramic coating on old granite and marble surfaces.
•Used for gluing glass mosaic.
Advantages:
•It is decorative due to its white color.
•Since it is the same color as the white joint, the joint application can be started in a shorter time.
•Processing time is long, saving time and labor.
•It allows the glued plates to be corrected for a long time.
•It is very flexible and provides strong adhesion.
•It is resistant to water and frost and is not affected by temperature changes.
•Provides high stability and does not sag in vertical applications.
Preparation of the Surface:
•Make sure that the application surface is cured.
•The application surface must be clean of anti-adhesion substances such as dust, oil, tar, pitch, paint, silicone, curing material, detergent and mold oils.
•Defects on the application surface should be corrected with suitable DEMAFIX repair mortars 24 hours before, depending on the depth and structure of the surface.
•The application surface should be wetted and kept moist. If the surface is very water absorbent, application should be made after applying a primer to the surface.
•In wet area applications, before using ceramic adhesive, waterproofing should be done with DEMAFIX's suitable waterproofing materials.
Preparation of Mortar:
•25 kg DEMAFİX FLEX Granite Ceramic Adhesive Mortar (White) is added to approximately 5.5 - 6.5 liters of clean water and mixed preferably with a low speed mixer until there are no lumps.
•The prepared mortar is left to mature for 5 - 10 minutes and used again by mixing for 1 - 2 minutes.
•The mixture in the container should be consumed within approximately 2 hours.
Application Information:
•First of all, a contact layer is formed by pressing the adhesive mortar strongly onto the application surface, and then the product is notched with a notched trowel selected according to the size of the tile. must be in contact with at least 80% of the back side of the ceramic.
•Depending on the floor slabs used and the smoothness of the floor, if necessary, a double-sided adhesion method should be preferred and adhesive mortar should be applied to both the back of the ceramic and the surface, and the slabs should be fixed so that the combing direction is perpendicular to each other.
•To ensure good adhesion, the ceramic must be adhered to the surface by applying force with a rubber-tipped mallet.
•By leaving a joint space compatible with the ceramic size and using the appropriate DEMAFIX joint filling material.
The application must be completed.
Consumption:
4 - 6 kg/ m2
Attention:
•Avoid application at temperatures below +5°C and above +35°C.
•Pay attention to the amount of water added to the mortar. Do not add more water than necessary.
•Avoid application in areas that are frozen, at risk of freezing within 24 hours, or exposed to direct sun and wind.
•Never add water or powder to expired mortar.
PACKAGING:
25 kg craft bags
Shelf life:
12 months on a pallet in a 10-layer stack in moisture-free environments and in its unopened packaging.
can be stored .
Health and Safety:
As with all chemical products, contact with food products, skin, eyes and mouth should not be avoided during use and storage. During application, work clothes, protective gloves, glasses and masks in accordance with occupational and worker health rules should be used. If swallowed by accident, consult a doctor. In case of contact with skin, wash with plenty of water. It should be stored in places inaccessible to children.