It is a white cement based, single component, polymer added, S2 class, very flexible, high performance and stability, high quality powder adhesive mortar with reduced slip properties, long working time.

Usage areas:

•Indoors and outdoors.

•On horizontal and vertical surfaces.

•For bonding large sized floor and wall ceramics, granite, granite ceramics, marble, clinker, glass mosaic and all kinds of natural stone covering materials.

•In places such as workplaces, shopping malls, schools and hospitals that are exposed to heavy pedestrian traffic.

•In areas where temperature changes are high, such as cold storages, freezing facilities and bottom heated systems.

•In places exposed to water and external weather conditions such as pools, water tanks, terraces and balconies.

•Used in ceramic coating on old granite and marble surfaces.

Advantages:

•It is decorative due to its white color.

•Since it is the same color as the white joint, the joint application can be started in a shorter time.

•It is very flexible and provides strong adhesion.

•It has the ability to change shape transversely.

•It is resistant to water and frost, and is resistant to surface tensions caused by sudden temperature changes.

•Processing time is long, time and labor are saved.

•It allows the glued plates to be corrected for a long time.

•Provides high stability and does not sag in vertical applications.

Preparation of the Surface:

•Make sure that the application surface is cured.

•The application surface must be clean of anti-adhesion substances such as dust, oil, tar, pitch, paint, silicone, curing material, detergent and mold oils.

•Defects on the application surface should be corrected with suitable DEMAFIX repair mortars 24 hours before, depending on the depth and structure of the surface.

•The application surface should be wetted and kept moist. If the surface is very water absorbent, application should be made after applying a primer to the surface.

•In wet area applications, before using ceramic adhesive, waterproofing should be done with DEMAFIX's suitable waterproofing materials.

Preparation of Mortar:

•25 kg DEMAFİX PRO PLUS+ Granite Ceramic Adhesive Mortar (White) is added into approximately 5.5 - 6.5 liters of clean water and mixed preferably with a low-speed mixer until there are no lumps.

•The prepared mortar is left to mature for 5 - 10 minutes and used again by mixing for 1 - 2 minutes.

•The mixture in the container should be consumed within 2 - 2.5 hours.

Application Information:

•First of all, a contact layer is formed by pressing the adhesive mortar strongly onto the application surface, and then the product is notched with a notched trowel selected according to the size of the tile.

must be in contact with at least 80% of the back side of the ceramic.

• Depending on the size of the floor slabs used, in uneven floors, areas exposed to heavy pedestrian and freight traffic, and in cold storages and bottom-heated systems where temperature changes are observed frequently, if necessary, double-sided bonding method should be preferred and adhesive mortar should be applied to both the back of the ceramic and the surface and the combing direction should be applied. The plates must be fixed perpendicular to each other.

•To ensure good adhesion, the ceramic must be adhered to the surface by applying force with a rubber-tipped mallet.

•The application should be completed by leaving a joint space compatible with the ceramic size and using the appropriate DEMAFIX joint filler material.

Consumption:

4 - 6 kg/ ^m2

Attention:

•Avoid application at temperatures below +5°C and above +35°C.

•Pay attention to the amount of water added to the mortar. Do not add more water than necessary.

•Avoid application in areas that are frozen, at risk of freezing within 24 hours, or exposed to direct sun and wind.

•Never add water or powder to expired mortar.

PACKAGING:

25 kg craft bags

Shelf life:

It can be stored for 12 months in moisture-free environments and in its unopened packaging on a pallet with a 10-layer stack.

Health and Safety:

As with all chemical products, contact with food products, skin, eyes and mouth should not be avoided during use and storage. During application, use work clothes, protective gloves, glasses and a mask in accordance with occupational and worker health rules. If swallowed by accident, consult a doctor. In case of contact with skin, wash with plenty of water. It should be stored in places inaccessible to children.