It is an acid-containing liquid cleaning agent used to clean cementitious mortar, paint, plaster and grout residues on the surface of acid-resistant coating materials. 

Usage areas:

•Indoors and outdoors.

•On horizontal and vertical surfaces.

•After application, it is used for cleaning purposes on tiles, ceramics, granite ceramics, clinker, cotto, rustic flooring, matte natural stone and artificial stone floors.

•It is corrosive because it contains acid. It should not be used on natural granite, marble, natural stone or special glazed mosaic floors and metals as it will remove their shine.

Advantages:

•Thanks to its acidic content, it easily cleans residues that cannot be removed with normal cleaning materials.

•The active ingredients it contains are 90% recyclable.

Preparation of the Surface:

Since the material is acidic in nature, a test is done on a small area before application to check whether the coating material on the surface is acid resistant. Otherwise, the coating material may be damaged. 

Application Information:

•It can be used by diluting 1/1 to 1/3 with water, depending on the amount of residue.

•Since the product is acidic in nature, the product must be added to water when diluting.

Water should never be added to the product.

• Cement Residue Cleaner is poured onto the cement residue and mixed in until the cement residue has a damp and wet appearance.

• Wait for 5 - 10 minutes to dissolve the material adhering to the surface.

•Loose residues are removed from the surface with the help of a plastic construction brush or a damp cloth that will not damage the surface.

•Dirty water on the ground should be collected in a bucket with a sponge.

•Then the surface should be cleaned with water and rinsed. 

Consumption:

It may vary depending on pollution and usage rate. 20 - 100 m2 surface can be cleaned  with 1 liter of product.

Attention:

•Acid-resistant gloves must be used.

•It should not be used on non-acid resistant coating materials, polished and polished surfaces, and polished marble and granite surfaces. If necessary, a trial should be done in a small area first.

•It should not be used for oil cleaning purposes.

•Other cleaning materials and bleaches should not be added to the product.

•Care should be taken to ensure that it does not mix with drinking water and groundwater.

•The product should not be contacted with cement-based joint filler.

PACKAGING:

In 1 liter plastic bottles

Shelf life:

It can be stored in its unopened package in a cool and dry environment for 12 months. Shake well before use. Protect against freezing.

Health and Safety:

As with all chemical products, contact with food products, skin, eyes, mouth and inhalation should not be avoided during use and storage. In case of contact, wash immediately with plenty of water and soap. If swallowed, drink water and consult a doctor immediately without trying to neutralize it. The exposed person should not be induced to vomit. During application, work clothes, protective gloves, glasses and masks in accordance with occupational and worker health rules should be used. Food and beverage materials should not be allowed into application areas, and application areas should be ventilated. It should be stored in places inaccessible to children.