It is an alkyd resin-based decorative wood protector with high penetration power, against fungus, pests and atmospheric factors.

ADVANTAGES

• It has protective properties against wood-damaging insects and fungus.

• Corrosive U.V. It is resistant to rays.

• It dries in a short time and has moisture adjusting properties.

• Excellent work.

• Provides a decorative appearance to wood.

AREAS OF USE

It is used on old and new, indoor and outdoor wooden surfaces, door and window frames, furniture elements and wood works where natural appearance is desired to be preserved.

APPLICATION INSTRUCTIONS

Surface Preparation;

• Surfaces should be dry, cleaned of oil, dirt and dust, and if necessary, sanded and dust removed.

Preparation of the Mixture;

• The product is ready for use.

• Do not mix the paint with another brand of paint.

• It should be mixed until it becomes a homogeneous mixture.

APPLICATION;

• It is applied to the surface with a brush or roller in 2 or 3 layers depending on the absorbency of the wood. The first coat should be thinned with 15-20% Synthetic Thinner in order for the varnish to penetrate well into the wood pores, and the 2nd and 3rd coats should be applied without thinning and waiting at least 24 hours between coats.

• During application, care should be taken to ensure that the surface and ambient temperature is between 5 and 35 °C.

Consumption;

• Depending on the type of wood on which it is applied, 1 L covers an area of ​​10-15 m2 in a single coat.

STORAGE CONDITIONS 

• The shelf life is 12 months at room temperature in its original, unopened package.

• It should be stored in a cool and dry environment, out of direct sunlight and protected from frost.

• Pallets should not be stacked on top of each other and should be shipped on a first-in, first-out basis.

• It can be stored in its original packaging in environments between 5 - 35 °C, away from direct sunlight. It should be protected from extreme temperature, humidity and frost.

PACKAGING

0.62kg, 2.0kg and 12kg

THINGS TO BE CONSIDERED

• Old paint layers that cannot support themselves under the paint should be cleaned.

• The application temperature should be taken into consideration; application should be made within the temperature range of +5°C +30°C.

SAFETY ADVICE

• During application, appropriate work clothes, protective gloves, glasses and mask should be used.

• Hands and eyes should be protected with gloves and protective glasses. If the material comes into contact with the eyes, the eyes should be washed with plenty of water and a doctor should be consulted immediately.

• Food and beverage materials should not be brought into the application area.

HARMFULNESS STATEMENTS

H225 Highly flammable liquid and vapour.

H315 Causes skin irritation.

H361d Suspected of causing harm to the unborn child.

H336 May cause drowsiness or dizziness

H373 May cause damage to organs through prolonged or repeated exposure.

H304 May be fatal if swallowed and enters airways.

PRECAUTIONARY STATEMENTS

P101 If medical advice is needed, keep the container or label.

P102 Keep out of reach of children

P103 Read label before use.

P210 Keep away from heat/sparks/open flames/hot surfaces. – No smoking.

P241 Use explosion-proof electrical/ventilation/ignition/material.

P301+P310 IF SWALLOWED: Call a NATIONAL POISON CENTER/doctor.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing.

remove/remove. Rinse your skin with water/shower.

P405 Keep locked up.

P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Since this technical sheet is prepared based on laboratory data under normal conditions,

Consult technical personnel for details that are not sufficient. Otherwise, errors that may occur as a result of lack of information will not impose liability on the manufacturer. Our company reserves the right to change this information.