It is a modified alkyd resin based, single component, high abrasion resistant and durable matte concrete polish.

ADVANTAGES

Since it increases the abrasion resistance of the surface, it prevents dust formation.

• It is easy to apply because it is single component.

• It ensures that the concrete is resistant to chlorine.

• Since the solvent it contains evaporates very quickly, it dries very quickly.

• Since it increases water permeability, it prevents cracks that may occur in plasters as a result of freezing.

• It is used as a polish thanks to the shiny film layer it creates.

• It protects the concrete against atmospheric effects that can penetrate the concrete in the form of salt or gases.

• It reduces dirt retention and the color of the concrete does not change due to rain.

• It has high UV resistance.

AREAS OF USE

In the protection of concrete and other cementitious surfaces in buildings and infrastructures,

• On floors and walls where a shiny appearance is desired,

• In order to increase the service life of concrete,

• Suitable for use on concrete surfaces with visible aggregates, it is bright, colorless and provides liveliness to the surface.

• Surfaces with surface hardener applied,

• In screed concretes,

• It is used in concrete casting in hot climates.

APPLICATION INSTRUCTIONS

Surface Preparation;

• Appropriate surface preparation methods should be used such as steam cleaning, high pressure water jetting or etching.

PACKAGING

1kg, 3kg and 15kg

THINGS TO BE CONSIDERED

• Old paint layers that cannot support themselves and absorbent surfaces such as lime under the paint should be cleaned.

• The application temperature should be taken into consideration; application should be made within the temperature range of +5°C +30°C.

SAFETY ADVICE

• During application, appropriate work clothes, protective gloves, glasses and mask should be used.

• Hands and eyes should be protected with gloves and protective glasses. If the material comes into contact with the eyes, the eyes should be washed with plenty of water and a doctor should be consulted immediately.

• Food and beverage materials should not be brought into the application area.

• The road surface on which the application will be made must be cleaned of oil, dirt and permanent dirt. Cleaning can be done by milling or sanding.

• Dirty, dusty, swollen and old painted surfaces should be scraped and cleaned.

• In environmental conditions where there is no rain or breeze, the temperature of the environment and asphalt should be min. It should be applied to a clean and dry asphalt surface, provided that the temperature is 15 degrees and the relative humidity is maximum 85%.

Preparation of the Mixture;

• The product is ready for use. In some cases, it is optionally thinned with 5-10% cellulosic thinner.

• Do not mix the paint with another brand of paint.

• It should be mixed until it becomes a homogeneous mixture.

Consumption;

• An area of ​​2 m2 can be painted in a single coat with 1 kg of paint. (at 130 µ dry film thickness)

STORAGE CONDITIONS 

• The shelf life is 12 months at room temperature in its original, unopened package.

• It should be stored in a cool and dry environment, away from direct sunlight and protected from frost.

Pallets should not be stacked on top of each other, first in, first out Application;

• It should be applied to the surface in 2 layers using a roller, brush or spraying.

• Wait 1 hour between coats.

• During application, care should be taken to ensure that the surface and ambient temperature is between 5 and 35 °C.

• It should be shipped as follows.

• It can be stored in its original packaging in environments between 5 - 35 °C, away from direct sunlight. It should be protected from extreme temperature, humidity and frost.

LIMITS OF LIABILITY

• Information provided in this technical sheet; It has been prepared as a recommendation in order to provide information and show general technical details in line with our experience and test results.

• DEMA GROUP INNOVATION KIMYA SAN. VE LTD. ŞTİ. Since it cannot control the conditions under which its products are used, it does not accept any responsibility for the application result and does not give any guarantee.

• The user of the product must test the suitability of the product for the application and purpose for which he intends to use the product and decide accordingly.

• DEMA GROUP İNOVASYON KİMYA SAN. is responsible for any consequences that may occur due to incorrect use or other than recommendations on where and how to use the product. VE LTD. ŞTİ. He cannot be held responsible.

• DEMA GROUP INNOVATION KIMYA SAN. VE LTD. ŞTİ. may change the features of its products without notice.

IMPORTANT WARNINGS              

• The paint should be mixed well before use.

• Ambient temperature during application should be between 5-35 °C.

• After each application; The brush, roller or spray machine should be cleaned with a suitable solvent.

• Surfaces on which Dema Concrete Polish is applied should be protected from physical and chemical factors for 1 day.

• Paint should never be discharged into sewers and water channels.

• Application should be done as stated above.

HARMFULNESS STATEMENTS

H225 Highly flammable liquid and vapour.

H315 Causes skin irritation.

H361d Suspected of causing harm to the unborn child.

H336 May cause drowsiness or dizziness

H373 May cause damage to organs through prolonged or repeated exposure.

H304 May be fatal if swallowed and enters airways.

PRECAUTIONARY STATEMENTS

P101 If medical advice is needed, keep the container or label.

P102 Keep out of reach of children

P103 Read label before use.

P210 Keep away from heat/sparks/open flames/hot surfaces. – No smoking.

P241 Use explosion-proof electrical/ventilation/ignition/material.

P301+P310 IF SWALLOWED: Call a NATIONAL POISON CENTER/doctor.

P303+P361+P353 IF ON SKIN (or hair): Take off immediately all contaminated clothing.

remove/remove. Rinse your skin with water/shower.

P405 Keep locked up.

P501 Dispose of contents/container in accordance with local/regional/national/international regulations.

Since this technical sheet is prepared based on laboratory data under normal conditions,

Consult technical personnel for details that are not sufficient. Otherwise, errors that may occur as a result of lack of information will not impose liability on the manufacturer. Our company reserves the right to change this information.