An acrylic emulsion based, white colored, water based liquid curing material that prevents rapid water loss in concrete.

Use Fields :

•Indoors and outdoors.

•On all vertical and horizontal concrete surfaces.

•After fresh concrete and surface hardener applications.

•In concrete applications where air flow and evaporation are high and humidity is low.

•In airports and field concretes.

•Concrete roads and bridges.

•Used in channels.

Advantages :

• Provides increase in concrete strength.

•Prevents shrinkage cracks on the surface of the concrete caused by rapid drying during curing.

•It has water repellent properties.

•It is more effective than laborious curing methods such as laying on sacks and canvas or watering.

• It does not contain solvents and is not flammable, so it can be used safely in closed areas.

•It does not constitute an obstacle for resin and cement based applications to be applied to the cured surface after application.

•It reduces labor costs and is economical due to its ease of application.

of the surface Preparation :

It is applied directly onto fresh concrete or surface hardeners applied to fresh concrete using brush, roller or pressurized spray equipment. However, in order to avoid damaging the surface, the concrete must have set sufficiently.

APPLICATION Information :

•In molded applications, it should be applied on fresh concrete immediately after removing the molds and before the joint formation, by spraying as soon as the surface begins to lose its initial shine (when the surface water begins to evaporate) or by brush or roller to avoid accumulation on the surface.

•A soft short bristle brush can be used on the wall, and a soft brush or roller can be used on the floor.

•The product is applied to the surface as a thin layer of equal thickness.

•The drying time of the material is approximately 2 hours (+20°C).

Consumption :

200 - 300 g/m ² (Varies depending on the absorbency and roughness of the surface.)

Attention :

•Immediately after outdoor applications, the concrete surface should be protected against factors such as snow and rain for 2 - 3 hours. At the end of this period, the curing material is not affected by external factors.

•If there are large thickness differences in application, stain formation may occur.

PACKAGING :

In 15 kg plastic buckets

Shelf Lifespan :

It can be stored for 12 months in a dry environment in its unopened package between +5°C and +25°C. Shake well before use. Protect against freezing.

Health And Safety :

As with all chemical products, contact with food products, skin, eyes and mouth should not be avoided during use and storage. During application, work clothes, protective gloves, glasses and masks in accordance with occupational and worker health rules should be used. If swallowed by accident, consult a doctor. In case of contact with skin, wash with plenty of water. It should be stored in places inaccessible to children.