Technical Spesifications: |
|
Appearance : |
White colored liquid |
Liquid Density : |
~ 1,02 kg/lt |
White colored liquid : |
+5 ° C to +35 ° C |
Drying Time : |
45 - 60 minutes |
Second Coat Application Time : |
1 - 1,5 minutes |
Service Temperature: |
- 30°C / +80°C |
Acrylic - based , single - component , ready - to - use primer material for absorbent surfaces .
Usage areas :
• In interior and exterior spaces.
• In horizontal and vertical applications ,
• Adhesion increased before the application of adhesive , plaster and decorative plaster .
• To protect water - absorbent surfaces such as gypsum - plaster , gypsum - plasterboard , aerated concrete, chipboard, briquette from moisture.
• As a primer before paint and wallpaper applications.
• It is used to increase adherence before applications on old surfaces .
Advantages :
• It is economical. It is ready to use and applied easily and quickly .
• It prevents rapid water loss of the mortar by applying it before cement - based coatings to be applied to absorbent surfaces .
• Provides resistance against moisture .
• Provides high adherence .
• It is water -based , odorless , and can be used safely in drinking areas .
Preparation of the surface :
• Care should be taken to ensure that the application surface is cured.
• The application surface must be cleaned of substances that prevent adhesion such as dust , oil , tar , pitch, paint, silicone , curing material , detergent and mold oils .
Application Information:
• Shake DEMAFİ X READY PRIMER well before use and apply to the surface in two layers with the help of a brush or roller.
• The drying time of the product is approximately 45 - 60 minutes .
Consumption :
100 - 200 g / m 2 ( Varies depending on the absorbency and roughness of the application surface . )
Attention:
• Avoid application at temperatures below +5 ° C and
above +35 ° C.
• Avoid application in areas that are frozen , at risk of freezing within 24 hours , or exposed to direct sun and wind.
• Prevent the application surface from getting oily . • Extremely hot surfaces can be moistened before application .
• Close the lid of the packaging tightly when not in use .
• Do not add foreign substances into the product .
PACKAGING:
5 kg and 20 kg plastic drums
Shelf Life :
be stored in its unopened package in a dry environment between +5 ° C and +25 ° C for 12 months . Shake well before use . Protect against freezing .
Health and Safety :
As with all chemical products, contact with food products , skin , eyes and mouth should not be avoided during use and storage . During the application , work clothes , protective gloves , glasses and masks that comply with work and worker health rules should be used . If swallowed by accident, seek medical advice . In case of contact with skin, wash with plenty of water . It should be stored in places where children cannot reach it .