It is a white cement-based, single-component, ready-made thin plaster with chemical additives that can be applied by machine or hand.

Use Fields :

•Indoors and outdoors.

•On walls and ceilings.

•It is used to obtain a smooth surface before painting and decorative coatings on surfaces such as rough plaster, concrete and exposed concrete.

Advantages :

•Provides a smooth surface.

•Since it is white in color, it can be used without painting.

•It positively affects the general appearance of the building.

•Reduces paint consumption.

•Saves time and labor.

•It provides high adherence to the surface and does not cause shedding or sagging.

• It provides easy and fast application both by machine and by hand.

•Since it is a fabricated mortar, it provides continuity of quality compared to black plaster.

•It is more resistant to outdoor conditions than black plaster.

of the surface Preparation :

•Make sure that the application surface is cured and solid.

•The application surface must be clean from substances that prevent adhesion such as dust, oil, tar, pitch, paint, silicone, curing material, detergent and mold oils.

•DEMAFIX Repair Mortars (White) should be used to repair cracks and holes on the surface, depending on the depth.

•Before exposed concrete applications, the surface should be primed with DEMAFIX Exposed Concrete Primer.

•The application surface must be moistened.

mortar Preparation :

•35 kg DEMAFIX Ready Plaster 0-08 (White) is added to approximately 7, 6 - 9 liters of clean water and mixed preferably with a low speed mixer until there are no lumps.

•The prepared mortar is left to mature for 5 - 10 minutes and used again by mixing for 1 - 2 minutes.

•The mixture in the container should be consumed within 2 - 3 hours.

APPLICATION Information :

•The material should be applied with a spray machine or trowel and spread over the entire surface in equal thickness.

•After application, the surface should be leveled with a smoothing gauge.

•Thin plaster application should not exceed 6 mm.

•The plaster that has started to harden must be smoothed by polishing it with a trowel without delay.

•After the application is completed, if the air temperature is high, the plaster should be moistened until it sets.

•It is necessary to wait at least 10 days for painting, depending on weather conditions and application thickness.

•To ensure stronger adhesion in outdoor applications, application should be made by mixing it with DEMAFİX LATEX or Double Component Elastic Insulation Material Component B.

•For transitions between different materials, plaster mesh should be used on the surfaces and plaster profiles should be used in the corners.

Consumption :

1.4 - 1.7 kg/m2 (for 1 mm thickness)

Attention :

•Avoid application at temperatures below +5°C and above +35°C.

Do not add foreign substances such as lime, cement, sand and plaster into the material .

•Pay attention to the amount of water added to the mortar. Do not add more water than necessary.

•Avoid application in areas that are frozen, at risk of freezing within 24 hours, or exposed to direct sun and wind. If snowfall or severe cold is expected within approximately 1 week after application, application should not be made or protective measures should be taken.

•Never add water or powder to expired mortar.

PACKAGING :

35 kg craft bags

Shelf life:

It can be stored for 12 months in moisture-free environments and in its unopened packaging, on a pallet with a 7-layer stack.

Health And Safety :

As with all chemical products, contact with food products, skin, eyes and mouth should not be avoided during use and storage. During application, work clothes, protective gloves, glasses and masks in accordance with occupational and worker health rules should be used. If swallowed by accident, consult a doctor. In case of contact with skin, wash with plenty of water. It should be stored in places inaccessible to children.