Cement - based , polymer - added , high - performance , flexible , specially prepared structure for thermal insulation boards .​​​​​​​​​​​​​​​​​ It is the river duty .

Areas of Use :
• Indoors and outdoors.

• Thermal insulation boards on rough and thin plaster applied concrete , brick , aerated concrete and similar surfaces​ It is used in the adhesion of materials ( EPS , XPS and stone wool )

Advantages :​

• It is easy to apply and provides excellent structure .​ • It is resistant to water and frost .
• It is not affected by temperature changes.

• It is flexible.
• Provides high stability , does not sag or jump .

Preparation of the surface :​​

• Care should
be taken to ensure that the application surface is cured.

 • The application surface must be cleaned of substances that prevent adhesion such as dust , oil , tar , pitch, paint, silicone , curing material , detergent and mold oils .
• The application surface should be wetted and kept moist .
​​​​​​​ • Defects on the application surface may be removed 24 hours before , depending on the surface depth and structure . It must be corrected with repair mortars .

Preparation of the mortar :​​

• 25 kg DEMAFIX​​​​​​​​​​​​​​​​​​ is done .
​​ • The prepared mortar is left to mature for 5 - 10 minutes and is used by mixing again for 1 - 2 minutes . • The mixture in the container should be consumed within 2 hours .

Application Information:

• Depending on the smoothness of the application surface.

Whole Surface Adhesion Method :​​​​​​

Apply​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​ ​is the preferred method.

Stripe and Point Applying Method :

Apply DEMAFIX​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​​ ​( This is the preferred method on irregular surfaces ).

• A gauge should be used when gluing the sheets during application .
​​​​​​​ • The adhered sheets should be pressed tightly to ensure a good adhesion , and after 24 hours they should be mechanically attached with dowels .​​​​​​

Consumption :​

depending on the application method : 3 - 4 kg/m2 for EPS and XPS 4 - 5 kg / m2 for stone wool

CAUTION

• Avoid application at temperatures below +5 ° C and above +35 ° C.​​
​​​​​​​​​​
• Avoid application in areas that are frozen , at risk of freezing within 24 hours , or exposed to direct sun and wind
• Never add water or powder to expired mortar.

• To prevent heat transfer , place the thermal insulation boards so that there are no gaps between them .
​​​​​​​​ • Be careful not to use
sheets that have lost their properties by being exposed to the sun for a long time . • The sheathing application should not be applied directly on building materials such as pumice or brick , but on rough plastered surfaces .​​

PACKAGING:

In 25 kg craft bags

Shelf Life :​​

in moisture-free environments and in its unopened packaging on a pallet with a 10-layer stack for 12 months.

Health and Safety :​

As with all chemical products, contact with food products , skin , eyes and mouth should not be avoided during use and storage . During the application , work clothes , protective gloves , glasses and masks that comply with work and worker health rules should be used .​​ If accidentally swallowed, seek medical advice