Cement based , single component , polymer and fiber reinforced thick aggregate , suitable for R2 class , providing smooth finishing on concrete surfaces for repair and maintenance purposes . It is a surface leveling mortar .​​

Usage Areas :

• In interior and exterior spaces ,
• Horizontal and vertical applications ,
• Restorations
• Repair of concrete and prefabricated concrete elements , • Wall and
ceiling plasters In the correction and
repair of the building , • Before painting , ceramic coating and insulation .

Consumption :

2 kg / m2 ( for 1 mm thick person )

Attention:

• Avoid application at temperatures below +5 ° C and above +35 ° C.​​​​​​​​​​

• Avoid application in areas that are frozen , at risk of freezing within 24 hours , or exposed to direct sun and wind .

• Never add powder or water to expired mortar .​​

• After the application is completed , keep the surface moist until the mortar cures .

• It cannot be applied on plaster , ready - colored plaster , paint and exterior coatings .

PACKAGING:

In 25 kg  craft bags

Shelf Life :​​

in moisture-free environments and in its unopened packaging on
a pallet with a 10-layer stack for 12 months.

Health and Safety :​

As with all chemical products, contact with food products , skin , eyes and mouth should not be avoided during use and storage . During the application , work clothes , protective gloves , glasses and masks that comply with work and worker health rules should be used .​​ If swallowed by accident, seek medical advice . In case of contact with skin, wash with plenty of water . It should be stored in places where children cannot reach it .and it is used to obtain a solid surface .​ It is suitable for static cracks up to 30 mm .

Advantages :​

• Does not cause leakage or dust formation.
• It can only be mixed with water and applied easily .​​ • It dries quickly , allowing use in a short time . • Its lining provides high adherence .
​ • It is resistant to water and the freeze - thaw cycle .​​​​​ • It is fiber reinforced.

Preparation of the Surface :
• Care should be taken
to ensure that the application surface is cured .​​​​ • The application surface must be cleaned of substances that prevent adhesion such as dust , oil , tar , pitch, paint, silicone , curing material , detergent and mold oils .
• The application surface should be wetted and kept moist .​​​​​​​

Preparation of the mortar :​​

• 25 kg DEMAFIX THICK REPAIR MORTAR GRAY is added to approximately 4.5 - 5 liters of clean water and mixed thoroughly , preferably with a low - speed mixer, until no lumps remain . is removed .
​​​​ • The prepared mortar is left to mature for 5 - 10 minutes and is used by mixing again for 1 - 2 minutes .
• The mixture in the container should be consumed within 30 minutes .

Application Information:

• Repair mortar is applied to cracked and broken areas separated from the surface with the help of a trowel .
​​​​​ • It can be applied in thickness between 5 - 30 mm .
• After application , it is recommended to moisten the surface at regular intervals within 24 hours .