Cement based , eliminates surface defects and unwanted roughness , self - leveling and can be applied up to 10 mm thickness .​​​​​​​ It is a C35 class floor leveling system .​​​​​​​​

Usage areas :​​

• In indoor and dry environments,
• In residences ,
• In hospitals,
• In educational buildings ,

• In shopping centers , stores and markets, • Ceramics, granite, marble, wood , parquet , laminate,

It is used to level the surface with a thickness of 2 - 10 mm before laying carpet , linoleum and PVC coatings .​

Advantages :​

• It is applied in a thickness of 2 - 10 mm .
• It is applied quickly and easily .
• It spreads on its own and reaches the scale, subsoil

It eliminates the roughness .
​​​​ • The final finish surface provides a homogeneous appearance .​​​​ • It has high adherence to the ground .
• It does not dust the surface.
• Suitable for underfloor heated floors .
​​​ • Can be applied on old concrete floors .

Preparation of the surface :​​

• The concrete subsurface must have sufficient compressive strength ( Minimum 25 N / mm 2 ) .

• Care should be taken to ensure that the application surface is cured .​​

• Weak concrete on the surface should be removed and the gaps should be filled with appropriate repair mortars .​​​​

• The application surface must be cleaned of substances that prevent adhesion such as dust , oil , tar , pitch, paint, silicone , curing material , detergent and mold oils .

• On heavily worn concrete surfaces , primer application should be started after increasing the adherence with cement mortar containing DEMAFİX LATEX .​​​​​​​​​

• The surface must be primed with DEMAFİX Floor Primer to prevent absorbency and increase adherence .​​​​​​​

• The level difference on the ground to be applied should be determined using tools such as hose scales and levels .

Preparation of the mortar :​​

• DEMAFİ​​​​​​​​​​​​​​​​​​​​ It is mixed with a low speed mixer until no lumps remain .​​​​

• The prepared mortar is left to mature for 2 - 3 minutes and is used by mixing again for 1 - 2 minutes .

• The mixture in the container should be consumed within approximately 30 - 35 minutes .

Application Information:

• Following priming of the surface, MONOFLOOR 100 - C35 application should be started at least 30 minutes later , depending on weather conditions .

• The prepared mortar in a fluid consistency should be poured onto the surface .​​​​​​​ In order to facilitate the spreading process , its thickness should be adjusted by making corrections in places with a notched trowel .​​​​ During application , a hedgehog roller and spiked shoes should be used to avoid air bubbles remaining inside the product .​​​​​​​​

• In applications in large areas , uninterrupted application is required to prevent the formation of cold joints . For this reason, to ensure the continuity of the pouring process , the material should be prepared in more than one bucket and the application should be completed by pouring it on the ground one after the other .

Consumption :​

1.6 - 1.8 kg/ m2 ( for 1 mm thick person )

Attention:

• Avoid application at temperatures below +5 ° C and above +35 ° C.​​​​​​​​​​

• Avoid application in areas that are frozen , at risk of freezing within 24 hours , or exposed to direct sun and wind .

• Never add water or powder to expired mortar .​​

• Avoid rapid drying of the material .​​

• You should wait at least 3 days for it to be coated .

 • It is not applied in outdoor and industrial areas .

 • It is not applied on wet surfaces exposed to moisture .

 • Surface repairs and primer on old concrete surfaces

Apply in layers .
​​​ • Heating system in underfloor heated systems​​​​​

It should be closed 24 hours before application and opened 72 hours after application .

PACKAGING:

In 25 kg craft bags

Shelf Life :​​

in moisture-free environments and in its unopened packaging on a pallet with a 10-layer stack for 12 months.

Health and Safety :​

As with all chemical products, contact with food products , skin , eyes and mouth should not be avoided during use and storage . During the application , work clothes , protective gloves , glasses and masks that comply with work and worker health rules should be used .​​ If swallowed by accident, seek medical advice . In case of contact with skin, wash with plenty of water . Store in places where children cannot access​