Acrylic dispersion based , high performance , ready to use , used for adhesion of thermal insulation boards .​​​​​​​​​​​​​​​​​​​​​ The type of paste used is adhesive .​​​​​​

Usage areas :​​

• Indoors and outdoors ,
• On mineral - based surfaces.

• Surfaces such as painted surfaces , plasterboard , gypsum plaster , cement chipboard , wood etc.​
​​​​ It is used to adhere thermal insulation boards ( EPS , XPS , stone wool , etc. ) onto it.

Advantages :​

• It is ready to use , it does not create dust like cement - based products .

• It does not contain solvents and is odorless. It can be used safely in indoor areas .

• It can be painted especially in indoor areas as it provides a more flexible
and stronger structure than cement - based adhesives .​​​​​​​​​​​​​​​​​ It is preferred for affixing heat and sound insulation boards onto surfaces .​​​​​​​​​​​​​

• It is resistant to moisture .
​ • It is easy to apply and saves labor.

• It has water vapor permeability .​

Preparation of the surface :​​

• Care should be taken to ensure that the application surface is cured .​​

• The application surface must be cleaned of substances that prevent adhesion such as dust , oil , tar , pitch, paint, silicone , curing material , detergent and mold oils .

• Loose parts on the surface should be removed , cracks should be repaired and the surface should be level .

• Surfaces with high water absorbency, such as aerated concrete , should be primed , if necessary , before DEMAFIX PASTE TYPE ADHESIVE application .

Application Information:

• Before application , DEMAFIX PASTE TYPE ADHESIVE should be mixed well in its own bucket and no external water should be added .​​​​

• DEMAFİX​​​​​​​​​​​​​​​​​​​​​​​​​​​​​ ​layer is created .​ Then, the entire product surface is combed with an 8 mm toothed trowel . During application , care should be taken not to carry adhesive from the edges of the sheet into the joint gaps .​​​​​

• Double - sided adhesion method is preferred and DEMAFİX PASTE TYPE ADHESIVE is applied both on the surface and on the insulation boards .​​​​​​​​​ A better result will be obtained if the carding directions are applied perpendicular to each other .

• To ensure good adhesion , it is adhered by applying force with the help of a rubber hammer .​​​​​​​​ Particular attention should be paid to the joints of the plates .

• It is recommended that 48 hours after the application of DEMAFI​​​​​​​​X

Consumption :​

3.5 - 4 kg/m 2 (Varies depending on the application surface . )

Attention:

• Avoid application at temperatures below +5 ° C and above +35 ° C.​​​​​​​​​​

• Avoid application in areas that are frozen , at risk of freezing within 24 hours , or exposed to direct sun and wind .

• Close the lid of the packaging tightly when not in use .​​​​​​​​​

• Do not add water or any other foreign substance into the product .

• Mix the product at regular intervals during operation .​​​​​​​​​​​​​​​​

• If the water absorbency of the surface and the boards to be adhered is low , the drying time of the product will be extended .

• To prevent heat transfer , place the thermal insulation boards on the surface in such a way that there is no gap between them as much as possible .​​​​​​​​

• Be careful not to use sheets that have lost their properties by being exposed to the sun for a long time .

PACKAGING:

In 15 kg  plastic buckets

Shelf Life :​​

Be stored in its unopened package in a dry environment between +5 ° C and +25 ° C for 12 months. Mix well before use .​​​​​​​​​​ Protect against freezing .

Health and Safety :​

As with all chemical products, contact with food products , skin , eyes and mouth should not be avoided during use and storage . During the application , work clothes , protective gloves , glasses and masks that comply with work and worker health rules should be used .​​ If swallowed by accident, seek medical advice . In case of contact with skin, wash with plenty of water . It should be stored in places where children cannot reach it .