It is an acrylic ( elastomeric ) resin based , single component , UV resistant , very flexible waterproofing material .​

Usage areas :​​

• In interior and exterior spaces.

• On horizontal and vertical surfaces.

• On different surfaces such
as reinforced concrete, galvanized, zinc , aluminum and sheet metal ,
• In bathrooms and kitchens etc. It is used in wet areas,
• Flat and sloping roofs.
• Chimney edges , hidden streams , eaves and gutters .

• Terraces and balconies .

Advantages :​

• It is ready for use .
​ • It is very elastic, it maintains its elasticity even at low temperatures.

• It is applied easily and quickly with a brush or roller

• Provides high adherence .
​ • It is permeable to water vapor and allows the concrete to breathe .
• It can be painted over with water- based paints .
• It is UV resistant .
​​ • It can be produced in various colors upon order .
• It does not create joints .
• It does not contain solvents and is non-toxic. It is suitable for drinking water contact .

Preparation of the surface :​​

• Care should be taken to ensure that the application surface is cured .

• The application surface must be cleaned of substances that prevent adhesion such as dust , oil , tar , pitch, paint, silicone , curing material , detergent and mold oils .

• Vertical corners must be chamfered appropriately.

Application Information:

• SUKES should be applied to the surface in a minimum of two layers with a brush or roller , each layer creating a film thickness of approximately 1 - 1.5 mm .
• It dries in approximately 4 - 5 hours , depending on weather conditions . The next coat should not be applied until one coat is completely dry.
• It is recommended to use carrier materials such as Water Insulation Mesh or felt between two layers on roofs that are against water pressure or on navigable roofs .​​ • SUKES gains mechanical strength after 5 days and becomes water impermeable after 7 days . It reaches its final strength after 14 days.
• In applications where coating will be applied , adhesion to the adhesion should be increased by sandblasting before the last layer dries .
• It must be protected against punctures and impacts.

Coloring and Painting:

produced in white color . It can be produced in different colors upon order . It can be colored with water-based paste type pigments during application . It can be painted with acrylic - based , water - based exterior paints .

Consumption :​

Approximately 1.4 kg / m2 is used for 1 mm film thickness .​​​​ It should be applied at least two coats . It is recommended to apply three coats in places where high protection is required.

Attention:

• Avoid application at temperatures below +5 ̊ C and above +35 ̊ C.​​​​​​​​​​

• Avoid application in areas that are frozen , at risk of freezing within 24 hours , or exposed to direct sun and wind .

• SUKES is not suitable for water tanks , swimming pools and foundation insulation that are under constant water pressure .​​​​​

• Do not contact with surfaces such as metal and glass . It may cause permanent staining.

• It should not be applied to wet and humid surfaces . • When product application is finished or paused​​

Do not leave the cover open.

PACKAGING:

In 5 kg and 15 kg plastic buckets

Shelf Life :​​

be stored in its unopened package in a dry environment between +5 ° C and +25 ° C for 12 months . Mix well before use .​​​​​​​​​​ Protect against freezing .

Health and Safety :​

As with all chemical products, contact with food products , skin , eyes and mouth should not be avoided during use and storage . During the application , work clothes , protective gloves , glasses and masks that comply with work and worker health rules should be used .​​ If swallowed by accident, seek medical advice . In case of contact with skin, wash with plenty of water.