Cement and acrylic based , super elastic , double component waterproofing material .​​​​​​​​ To provide insulation , the two components must be mixed together .​​​​​​​​​ It is resistant to positive water pressure .​​​​

Usage areas :​​

• In interior and exterior spaces.

• In horizontal and vertical applications.
• In water tanks and swimming pools ( with the condition of being covered ).
• Insulation of foundation curtains In the insulation of retaining walls and basements.

·       In the insulation of balconies and reinforced concrete roofs ( with the condition that they are covered ).
• Cisterns .

·        In irrigation channels , manholes , concrete pipes.
• In wet areas such as bathrooms and kitchens.
• In facilities such as spas and baths.
• In flower bed insulation .

• In the production of ceramics , granite and coating materials. It is used for heating.​​​​​​​​

Advantages :​

• It is easily applied on horizontal and vertical surfaces with a brush , roller , trowel or spraying machine .

• Provides seamless and joint - free waterproofing.

• Provides high performance water impermeability.

• It is elastic, does not shrink and does not crack .
• It is permeable to water vapor and allows the concrete to breathe .
• It is non-toxic, ideal for drinking water tanks.

• Thanks to its flexibility and high adhesion properties , it creates a perfect insulation layer under ceramics and glass .
​​​​​​​ • Protects concrete surfaces from carbonation and chloride .

Preparation of the surface :​​

• Care should be taken to ensure that the application surface is cured.

• The application surface must be cleaned of substances that prevent adhesion such as dust , oil , tar , pitch, paint, silicone , curing material , detergent and mold oils .

• The application surface must be saturated with water and kept moist during application.

• Vertical corners must be chamfered appropriately.

Preparation of the mortar :​​

• 7 kg of component B is placed in a clean plastic container. 20 kg of component A is slowly added to the liquid and mixed without adding external water , preferably with a low speed mixer at 400 - 600 rpm , until no lumps remain . It is done .​​ After 3 - 5 minutes of resting time , it is mixed for another 30 seconds and applied .

• The mixture in the container should be consumed within 30 minutes and the sauté mixture should not be used after this period.

Application Information:

• DEMAFİX FULLY ELASTIC WATERPROOFING MATERIAL is applied to the surface in at least two layers, perpendicular to each other . After applying the first coat, wait at least 5 - 6 hours at +20 ° C , this period should not exceed 24 hours . The second coat should be applied before the first coat is completely dry . If the first coat is dry , the surface should be slightly moistened again before applying the second coat . After the second coat is applied , the surface should be protected against the sun and rapid drying for 3 days .​

• It is recommended to use Waterproofing Mesh between two layers during application .​​ The use of net increases the carrying properties of the product .​​​​​​​​​​​​​

•The product gains mechanical strength after 3 days and becomes water impermeable after 7 days . It gains its final strength after 14 days.​​

• It should be protected against punctures and impacts until it is coated.

Consumption :​

1 kg/m2 is applied on each layer , 1 mm thickness is obtained . It should be applied in at least two coats (2 kg/m2) It is recommended to apply three layers in places where high protection is required ( 3 - 4 kg / m2).

Attention:

• Avoid application at temperatures below +5 ̊ C and above +35 ̊ C.​​​​​​​​​​

• Avoid application in areas that are frozen , at risk of freezing within 24 hours , or exposed to direct sun and wind .

• Do not add external water to the mixture .
• The powder component should always be added to the liquid component . • During application , the wet film thickness should be adjusted for a single layer .

It should not exceed 2 mm .​​

PACKAGING:

A Component width : In 20 kg kraft bags B Component width : In 7 kg plastic drums

Shelf Life :​​

pallet in a 10-layer stack in moisture-free environments for 12 months. Shake the liquid component before use and protect against freezing .​​​​​​​​

Health and Safety :​

As with all chemical products, contact with food products , skin , eyes and mouth should not be avoided during use and storage . During the application , work clothes , protective gloves , glasses and masks that comply with work and worker health rules should be used .​​ If swallowed by accident, seek medical advice . In case of contact with skin, wash with plenty of water . It should be stored in places where children cannot reach it.