Acrylic emulsion based, matte, can be used especially in the transition from solvent-based paint to water-based paint.

It is an interior transition primer.

ADVANTAGES

• It prepares a solid base and ensures good adhesion of the final coat of paint to the surface.

• It reinforces the ground and increases the adhesion of the film to the surface.

• Increases paint performance.

• Reduces paint consumption.

AREAS OF USE

It is used as a transformation primer when changes are desired by applying water-based interior paint over solvent-based paint. Additionally, it is used as a primer on all kinds of concrete, aerated concrete, briquette, brick, plaster and similar raw walls, before the final coat of exterior/interior paint.

APPLICATION INSTRUCTIONS

Surface Preparation;

• Before application, swollen, loose and unhealthy-looking surfaces should be scraped, and the old synthetic painted surface should be lightly sanded to remove oil and dirt from the surface.

• Surface defects should be corrected with Dema Acrylic Putty or Demafix Repair Mortars.

Preparation of the Mixture;

• It is diluted with 10% water by volume and applied in a single layer with a brush or roller. Water-based topcoat paint can be applied at least 2 hours after the primer application.

APPLICATION;

• Before application, swollen, loose and unhealthy-looking surfaces should be scraped, and the old synthetic painted surface should be lightly sanded to remove oil and dirt from the surface. It is diluted with 10-15% water by volume and applied in a single layer with a brush or roller. Water-based topcoat paint can be applied at least 2 hours after the primer application.

Consumption;

• Depending on the smoothness and absorbency of the surface, an average of 0.09 lt/m2 in a single coat.

• AREA THAT CAN BE PRIMORED: Depending on the surface, an area of ​​10-14 m2 can be primed with 1 L and 6.5-9 m2 with 1 kg in a single coat.

STORAGE CONDITIONS 

• Shelf life is 12 months.

• It should be stored in a cool and dry environment, out of direct sunlight and protected from frost.

• Pallets should not be stacked on top of each other and should be shipped on a first-in, first-out basis.

It can be stored in its original packaging at 5 - 35 °C, away from direct sunlight. It should be protected from extreme temperature, humidity and frost.

PACKAGING

3kg, 10kg and 20kg.

THINGS TO BE CONSIDERED

• In order to obtain the desired texture and for ease of application, use a satin roller when applying on flat surfaces such as satin plaster and putty; It is recommended to use a plastic roller when applying on plastered and highly absorbent surfaces.

• Old paint layers that cannot support themselves and absorbent surfaces such as lime under the paint should be cleaned.

• The application temperature should be taken into consideration; application should be made within the temperature range of +5°C +30°C.

SAFETY ADVICE

• During application, appropriate work clothes, protective gloves, glasses and mask should be used.

• Hands and eyes should be protected with gloves and protective glasses. If the material comes into contact with the eyes, the eyes should be washed with plenty of water and a doctor should be consulted immediately.

• Food and beverage materials should not be brought into the application area.

LIMITS OF LIABILITY

• Information provided in this technical sheet; It has been prepared as a recommendation in order to provide information and show general technical details in line with our experience and test results.

• DEMA GROUP INNOVATION KIMYA SAN. VE LTD. ŞTİ. Since it cannot control the conditions under which its products are used, it does not accept any responsibility for the application result and does not give any guarantee.

• The user of the product must test the suitability of the product for the application and purpose for which he intends to use the product and decide accordingly.

• DEMA GROUP İNOVASYON KİMYA SAN. is responsible for any consequences that may occur due to incorrect use or other than recommendations on where and how to use the product. VE LTD. ŞTİ. He cannot be held responsible.

• DEMA GROUP INNOVATION KIMYA SAN. VE LTD. ŞTİ. may change the features of its products without notice.

IMPORTANT WARNINGS

• The primer should be mixed thoroughly before use.

• Ambient temperature during application should be between 5 - 35 °C.

• After each application; The brush or roller should be cleaned with water.

• The liner should never be discharged into sewers and water channels.

• Application should be done as stated above.

HARMFULNESS STATEMENTS

H317 May cause allergic skin reactions.

PRECAUTIONARY STATEMENTS

P101 If medical advice is needed, keep the container or label.

P102 Keep out of reach of children

P103 Read label before use.

P261 Avoid breathing dust/fume/gas/mist/vapor/spray.

P280 Wear protective gloves/protective clothing/eye protection/face protection.

P321 Special attention required (see label)

P363 Wash contaminated clothing before reuse.

P333+P313 If skin irritation or pruritus occurs: Get medical advice/attention.

P501 Dispose of contents/container in accordance with local/regional/national/international regulations.