Acrylic-based, one-component, ready-to-use primer for dust-prone and absorbent surfaces.

material.

Areas of Use:

• Indoors and outdoors,

• In horizontal and vertical applications,

•On highly absorbent surfaces,

• Before floor materials such as leveling screed

• If it will be applied on floors with underfloor heating, the heating should be turned off during application. In winter applications, the heating system should be kept between 15 - 18°C.

• To increase adherence before ceiling plastering,

• It is used to increase the adherence of concrete surfaces that will be exposed to pedestrian traffic against dust.

Consumption:

100 - 200 g/m2 (Varies depending on the absorbency and roughness of the application surface.)

Attention:

• Avoid application in areas that are frozen, at risk of freezing within 24 hours, or exposed to direct sun and wind.

• DEMA SURFACE PRIMER should be shaken well before use.

PACKAGING:

In 5 kg and 20 kg plastic drums

Shelf life:

It can be stored for 12 months in its unopened package. Shake well before use. Protect against freezing.

Health and Safety:

As with all chemical products, contact with food products, skin, eyes and mouth should not be avoided during use and storage. During application, work clothes, protective gloves, glasses and masks in accordance with occupational and worker health rules should be used. If swallowed by accident, consult a doctor. In case of contact with skin, wash with plenty of water. It should be stored in places inaccessible to children.

Advantages:

• It is water-based, odorless and can be used safely indoors.

• Provides high adherence and prevents dust formation.

• It is applied before cement and plaster based coatings to be applied to absorbent surfaces, preventing rapid water loss of the screed and air bubbles that may occur.

•Increases workability.

• Provides resistance against moisture.

• Suitable for bottom heated systems.

• It is also suitable for use on ceilings and vertical surfaces.

PREPARATION OF THE SURFACE:

• Care should be taken to ensure that the application surface is cured.

• The application surface must be clean of anti-adhesion substances such as dust, oil, tar, pitch, paint, silicone, curing material, detergent and mold oils.

Application Information:

• DEMA SURFACE PRIMER Floor Primer is a ready-to-use primer. Shake well before use and apply to the surface in a single layer using a brush or roller. If necessary, 2 coats can be applied on some surfaces.

• When applying the first coat on old concrete or rough damaged surfaces, dilute it 1/1 with water, and apply it undiluted on the second coat.

• The drying time of the product is approximately 45 - 60 minutes. If coating will be done on it, coating should be done before the primer dries completely.

Acrylic-based, one-component, ready-to-use primer for dust-prone and absorbent surfaces.

Material

Areas of Use:

• Indoors and outdoors,

• In horizontal and vertical applications,

•On highly absorbent surfaces,

• Before floor materials such as leveling screed

• If it will be applied on floors with underfloor heating, the heating should be turned off during application. In winter applications, the heating system should be kept between 15 - 18°C.

• To increase adherence before ceiling plastering,

• It is used to increase the adherence of concrete surfaces that will be exposed to pedestrian traffic against dust.

Consumption:

100 - 200 g/m2 (Varies depending on the absorbency and roughness of the application surface.)